Choosing the Right TouchDRO Adapter for Your Scales

Tuesday, September 27, 2016

I started offering pre-made controllers/DIY kit earlier this year, and have received a number of emails asking to clarify which DRO controller to chose and why. At the time of this writing I offer three versions of the controller hardware: two as a pre-assembler board and one as a DIY kit. Each controller is designed to interface with specific set of scales and uses firmware that is specifically optimized for that particular hardware. The purpose of this post is to explain what each controller was designed for and what are the benefits/tradeoffs of using it as opposed to the other controllers.